Nucore Alloys is one of the prominent supplier, trader and stockist of Stainless Steel Products, which is stabilized for weldments subject to sever corrosive conditions and service from 800 Degree F to 1600 Degree F. grades such as 301,303,304,304H,316,316L,316H,321,310,347,347H and more

Nucore Alloys is a prominent leader in exporting and trading CS Other Products, which is available in different sizes and shapes to our clients. We also offer the same in different grades and specifications Such as IS-2062 E250, E350, E410, E450, E550, E650, SALIMA, EN SERIES EN8, EN19, EN24, EN31, EN45

Nucore Alloys is one of the prominent trading house & supplier in Alloy 20 Angle, Channel, Beam, Chain, which cannot be hardened by heat treatment. The austenitic stainless steels such as Alloy 20 Angle are considered to be the most weldable of the high – alloy steels and can be welded by all fusion and resistance welding processes. Alloy 20 C-Channel is annealed in the 1600 Degree F – 1650 Degree F (871 Degree C – 899 Degree C) range and then air cooled to relieve cold working stresses

Nucore Alloys offers an extensive collection of Nickel Alloy, which will exhibit only randomly and dispersed non – metallic inclusions, where it consists of metal sulphides or silicates. We also offer these products in different grades such as Nickel & Nickel in customized sizes and shapes to our esteemed patrons. By proper control of the amount of hot or cold work and by the selection of appropriate thermal treatments in Nickel Angle, finished fabrications can be produced to a rather wide range of mechanical properties.

Nucore Alloys offers a wide range of Monel Alloy Products, which can even be a substitute of Austenitic grade of marine surrounding. We also offer the same in different grades such as Monel Alloy Products and Monel Alloy Products. Although it is primarily noted for heat and oxidation resistance, this Monel Angle also has good resistance to chloride stress – corrosion cracking and has good resistance to carburization, excellent resistance to reducing or carburizing atmospheres.

Nucore Alloys is one of the pioneer suppliers and trader of 254 SMO Other Products, which is available in different sizes, designs and shapes in customized options for our clients. SMO 254 Angle has been shown that nickel has very little statistically detectable effect on pitting corrosion resistance over the full range of austenitic stainless steels. When SMO 254 C-Channel is not satisfactory for use in a particular application due to susceptibility to SCC, then selection of the other alloys for that application would be an exceedingly risky proposition.

Nucore Alloys is one of the pioneer whole seller and dealer of Hastelloy Alloy Products, where its behaviour occurs as a consequence of the precipitation of deleterious phases. When exposed for prolonged periods at intermediate temperatures, Hastelloy Angle exhibits a loss of room temperature ductility in much the same fashion as some other solid – solution –strengthened super alloys. Wear results shown in Hastelloy Chain is generated for standard matching material room – temperature pin on disc tests, where wear depths are given as a function of applied load.

Nucore Alloys is a known manufacturer and exporter of Titanium Other Products, which is stronger than and equally corrosion – resistant against most applications. Titanium Angle is least used of the commercially pure titanium grades, but that does not make it any less valuable. Titanium C-Channel can also be easily machined, hot worked and welded, where hot working should be performed between 400 Degree F and 600 Degree F. Titanium Chain is not heat treatable, and is used for condensers & heat exchangers.